Product Description

Product Description
There is no need to solder anymore! LEDSTRIPWORLD has found a solution for our LED Flexible Lights, a special solder cable that is designed and manufactured  for LEDSTRIPWORLD. The  LED Strip Connector with DC Plug connects our LED strip lighting with their DC adapters, and features our LED strip connector at one end, and our standard  coaxial connector at the other.

The  LED Strip Connector:

Eliminates need to solder
Provides a permanent, secure connection
Saves Time

Using the connector couldn't be simpler. Instructions for use:

Slide Flexible LED Light into the small LED molex clamp
Using care, firmly secure the clamp with the two small brown tabs by squeezing them toward the LED strip.

Plug in your DC adapter!

24 key Infrared Controller adopts the advanced micro control unit,it is used for controlling ultra Flexible waterpoof Tri-Chip LED Strip(SMD 5050 RGB), and a variety of lamp whose source of light is LED. For instance, point source of light,flexible chatoyancy, wall washer lamp, glass curtain wall light and so on; it has many advantages such as low price, easy connection and simplicity to use.Meanwhile,you could adjust brightness, static color choices and various dynamic changes in lighting effects through infrared remote control.

Working temperature: 20-60 ℃
Supply voltage: DC12V
0utput: 3 channels
Connecting mode：common anode
External dimension：L89.2XW70XH27.5 mm
Packing size：L160ΧW95ΧH51 mm
Net weight: 50 g
Gross weight: 85 g
Static power consumption: <1 W
Output current: <2 A (each channel)
Output power: <72W

Summarization
8 Keys RGB RF Controller adopts the advanced micro-control unit,it is used for controlling a variety of lamp whose
source of light is LED. For instance, point source of light,flexible strip light, wall washer lamp, glass curtain wall
light and so on;It has power-fail memory, synchronized indicator light show and other functions. At the same
time,it has many advantages such as low price, easy connection and simplicity to use. According to the actual
need of customers,it can carry out jumpy changing,gradual changing,stroboflash and other effects of change.
Technical Parameters
? Working temperature: -20-60 ?
? Supply voltage: DC12V
? Output: 3 channels
? Connecting mode: common anode
? External dimension: L121?W53?H25 mm
? Packing size: L150?W76?H51 mm
? Net weight:255g
? Gross weight:285g
? Static power consumption: <1W
? Output current: <4A(each channel)
? Output power: 12V:<144W

Direction for use
1. Connect the load wire at first, following by the power wire; Please ensure short circuit can not
occur between connecting wire before you turn on the power;
2. Adopt film button and RF for controlling,there are 8 buttons in all, the funtion of each key as
follows:
(1): you could turn on/off controller at any time;
(2): Play/pause button,it is convenient for you to see the static effection of led;
S(3)+: The step of the speed change add 1 by each pressing;
S-(4): The step of the speed change subtract 1 by each pressing;
B+(5): A brightness control button,the step of the brightness add 1 by each pressing;
B-(6): The step of the brightness subtract 1 by each pressing;
M+(7): The NO. of patterns add 1 by each pressing;(refer to the following form)
M-(8): The NO. of patterns subtract 1 by each pressing;

RF Remote Control dimmer is a controller that can adjust brightness infinitely, its control mode is wireless control,you could adjust light to the appropriate lighting brightness in accordance with your actual need. It is perfect for dimming your Flexible LED Strip. It can be used with any of the many colors available. Easy to install.

Specifications:

● Working temperature: -20-60 ℃
● Supply voltage: DC 12V
● Output: 1 channel
● Dimension: L110 X W56 X H34 mm
● Rated load current: <8A
● Output power:<96W

LED dimmer is made for LED strip and is perfect for dimming your Flexible LED Strip. It can be used with any of the many colors available. It is easy to install. It can be mounted as is with 4 screws or remove the cover and flush mount to wall.

● Working temperature: -20-60 ℃
● Supply voltage: 12V DC
● Output: 1 channel
● Dimension: L89×W59×H35mm
● Rated load current: <8A
● Output power:<96W

With this 12V Inline LED Dimmer Switch you can now dim most of LEDSTRIPWORLD's 12V DC LED lighting products! Simply plug this attractive and easy-to-use LED dimmer switch into your 12V adapter at one end and your lighting source at the other, whether it's strip lighting or cabinet lighting. Dimming is achieved with a turn of the smooth and sensitive rotary dial, which is housed in sturdy white plastic. It can also be used as an on/off switch, but with all the added features of a dimmer.

This switch features full on and off capabilities, along with everything in between. The male and female connectors at each end of the switch are the 1/4" coaxial plug that is standard on most LEDSTRIPWORLD's products, making it a flexible and useful accessory.

With the 12V LED Dimmer Switch, you can take advantage of both the brightness of LEDSTRIPWORLD's strip lights and bars as well as their low-level mood and accent lighting capacities, all without any troublesome flickering. Use this switch for sensitive lighting situations, such as glass or crystal displays, fine art lighting, or in any application where just the right amount of brightness is required.

Summarization
Dimmer is a controller that it can adjust brightness, its control mode is knob-operated control, you could adjust light to the appropriate lighting brightness in accordance with your actual need.
Technical parameters
?Working temperature: -20-60?
?Supply voltage: 12V DC (DC5V, DC24V also available, if you need, please specify the required voltage in "Special Instructions" when checkout)
?Output: 1 channel
?External dimension: L61?W33?H32 mm
?Packing size: L105?W65?H40 mm
?Static power consumption: <1W
?Output current: <2A
?Power output: 24W

Direction for use
1. Connect the load wire at first, following by the power wire;
2. Adopt rotary button,its function as follows:
Rotate button to the right,brightness will be brighter,when you rotate it to the far right,the
brightness is greatest. Rotate button to the left,brightness will be darker,when you rotate it to the far left,the light will be turned off.

Typical Applications

Rainproof LED power supply

Description: 
Input Voltage:AC 90-264V
Input Voltage:Frequency 47-63Hz

Rainproof LED power supply has fuse inside for high voltage and over current protection.

  Cabinet Dimension(mm):155 x 103 x 45

Input: AC 90-130V / AC 170-250V

Dimension:

12V 2.5 amps (30W): 200*30*20mm     NW: 0.26KG

12V 5 amps (60W): 185*72*45mm        NW: 0.90KG

12V 8.3 amps (100W): 248*72*45mm   NW: 1.25KG

Hardwire this Waterproof LED Power Supply directly to your high voltage input source, and it will give you a stable 12 volts of power up to 2.5 amps (30W) / 5.0 amps (60W) / 8.3 amps (100W).

It is completely sealed and achieves a waterproof rate of IP67.

This Waterproof LED Power Supply ensures a good lighting effect and a long life span for all 12 volt LED products.

Like all LEDSTRIPSWORLD products, this strip bears a RoHS (Restriction of Hazardous Substances) certificate that strictly ensures that no toxic materials were used in its manufacture.

Leakage current: <0.5mA/240VAC
Overload protection: 125%Type  Reset: auto recovery
Temperature coefficient: ±0.02%(050)
Setup rise hold up time: 100ms
Vibration: 10500Hz,2G 10min./1cycle,Period for 60min,Each axes
Withstand voltage:  Input and output interval2.0KVAC,Input and enclosure2.0KVAC,Output and enclosure500VAC
Isolation sistance:  Input and output interval,Input and enclosure,Output and enclosure2000VAC/3S
Working temperature and humidity: -10~+60,20%90%RH
Store temperature and humidity: -20~+85,10%95RH
Lead Wire, 0.75 mm2 VDE power cord 20CM

Dimensions:

102W: 199mm*98mm*38mm

120W: 199mm*98mm*38mm

150W: 199mm*98mm*38mm

180W: 199mm*98mm*42mm

240W: 200mm*110mm*50mm

360W: 215mm*115mm*50mm

With a PWM switching design, composed by a professional integrate circuit, this 12V power supply has reliability written all over it. Meant for heavy duty or industrial / architectural purposes, this power supply will power up to 30 amps, and has an output of 350W.

Ultra efficient design with built in stabilizer ensures optimal power delivery for your lighting project.

LED Power Supply, 110-220V AC to Low voltage DC, Plug Adapter to suit your Country, Plug into any household 110/220V AC electrical outlet.

SMD 3528 (300leds)  24W/5 meters,  so you need  at least 2 amp 24W led power supply, we recommend 3 amp 36W led power supply.

SMD 5050 (150leds)  36W/5 meters,  so you need  at least 3 amp 36W led power supply, we recommend 4 amp 48W led power supply.

SMD 5050 (300leds)  72W/5 meters,  so you need  at least 6 amp 72W led power supply, we recommend 8 amp 96W led power supply.

SMD 5050 LED Light Bar, SMD5050,30Leds, Aluminum shell LED Light Bar, 50*1.2cm, DC12V, 7.2w, IP65

The product adopts 30 pcs super bright SMD 5050 LED as luminous body.The wires come out from both ends with waterproof connector.
Available color:Red,Green,Blue,Yellow,Pure White,Warm White,RGB full color,etc.
Aluminum Alloy outer shell, sealed transparent glue Inside.
Dimension: 500*12*7mm.
Working condition:DC12V, current 0.6A, power 7.2W
Waterproof IP rank: IP65.
Widely used for advertising decoration, interior decoration, local lighting, etc.

Note:
1. Accessory: 2pcs metal U type clips, 4PCS  ?3*8 screw;

2. coming with transparent waterproof connectors on the two ends (from profile),

 it is130mm long,and the strips can be connected directly, max 10pcs. 

SMD 5050 LED Light Bar, SMD5050,30Leds, Aluminum shell LED Light Bar, 50*1.2cm, DC12V, 7.2w, IP65

The product adopts 30 pcs super bright SMD 5050 LED as luminous body.The wires come out from both ends with waterproof connector.
Available color:Red,Green,Blue,Yellow,Pure White,Warm White,RGB full color,etc.
Aluminum Alloy outer shell, sealed transparent glue Inside.
Dimension: 500*12*7mm.
Working condition:DC12V, current 0.6A, power 7.2W
Waterproof IP rank: IP65.
Widely used for advertising decoration, interior decoration, local lighting, etc.

Note:
1. Accessory: 2pcs metal U type clips, 4PCS  ?3*8 screw;

2. coming with transparent waterproof connectors on the two ends (from profile),

 it is130mm long,and the strips can be connected directly, max 10pcs. 

SMD 5050 LED Light Bar, 30Leds,3-LED cuttable, Firbre board, 57*0.8cm DC12V, 7.2W

Product Features:
1) Single Colors and RGB Full Color, viewing angle is 120 degrees and voltage is 12V DC
2) 57*0.8cm
3) cuttable ar every 3-led. easily can be connected by cable connector ,maintenance free
4) Solid-state, high shock / vibration resistant
5) Life:10,000 hours at least

Application:
1) Architectural decorative lighting
2) Path & Contour Marking
3) Auditorium walkway lighting
4) Stairway accent lighting
5) Backlighting for signage letters
6) Indoor lighting and signs

SMD 3528 LED Light Bar, 30 Leds,3-LED cuttable,Firbre board, 48*0.8cm DC12V, 2.4W 

Product Features:
1) Single Colors and RGB Full Color, viewing angle is 120 degrees and voltage is 12V DC
2) 48m*0.8cm
3) cuttable ar every 3-led. easily can be connected by cable connector ,maintenance free
4) Solid-state, high shock / vibration resistant
5) Life:10,000 hours at least

Application:
1) Architectural decorative lighting
2) Path & Contour Marking
3) Auditorium walkway lighting
4) Stairway accent lighting
5) Backlighting for signage letters
6) Indoor lighting and signs

SMD 5050 Flexible LED Strip light - 0.5 meter 30 LEDs

30 Leds, 3-LED Cuttable, DC12V, 7.2W, 0.6A, view angle: 120°, PCB width : 12mm, On PCB with self-adhesive back. Non-waterproof.

if you want buy full reel (5 meter) or waterproof type please check here!

if you choose RGB color, then you need a RGB controller

These 12 volt Flexible LED Strip are sold in 0.5m as a nuit, each unit include 30 pcs SMD 5050. If you enter a quantity of "2", you will get 1 meter in one piece. If you enter a quantity of  "3", you will get 1.5 meter in one piece, and so on.  Maximal :10 (5m)

The Comparison Between SMD 3528 and SMD 5050 LED Strip Lights

SMD 5050 Flexible LED Strip light, 15 Leds,0.5 meter, 3-LED Cuttable, DC12V, 3.6W, 0.3A,view angle: 120°, PCB width 10mm, On PCB with self-adhesive back. Non-waterproof.

These 12 volt Flexible LED Strip are sold in 0.5m as a unit, each unit include 15 pcs SMD 5050. If you enter a quantity of "2", you will get 1m in one piece. If you enter a quantity of  "3", you will get 1.5m in one piece, and so on.  Maximal :10 (5m)

if you want buy full reel (5m) or waterproof type please check here!

if you choose RGB color, then you need a RGB controller

The Comparison Between SMD 3528 and SMD 5050 LED Strip Lights

SMD 3528 Flexible LED Strip - 0.5 meter 30 LEDs

On PCB with self-adhesive back,Non-waterproof.

These 12 volt Flexible LED Strip are sold in 0.5m as a unit, each unit include 30 pcs SMD 3528.  If you enter a quantity of "2", you will get 1 meter in one piece. If you enter a quantity of  "3", you will get 1.5 meter in one piece, and so on.  Maximal : 10 (5m)

if you want buy full reel (5 meter) or waterproof type please check here!

The Comparison Between SMD 3528 and SMD 5050 LED Strip Lights

For your convenience, Flexible LED Strip are sold by smaller unit, so you can order the exact amount you need.

Super bright LEDs
Flexible and durable strip 
Brand new and waterproof
Transparent when not in use
Both use external and internal

Voltage: 12 V
Watt: 1.92 W
Current: 0.16 amps
Wire Length: 38 cm
Strip Length: 24 cm
Number of Bulbs: 24 pcs
Easy to install and clean
Bulbs Color:Yellow,Red,White,Green,Blue

Very bright and very cool, these strips, give you total lighting flexibility, put next to no drain on your car battery, and no matter whether you use them in hard rain or the driest night on record, they won't fail you.

LEDSTRISPWORLD LED strips put out a minimum amount of heat, so there's no fire risk, and they'll fit in a variety of places:
Around the front grille
Under foot-wells
On wheel wells
In the trunk
Under the hood
On headlights
Along the dash
Wherever the heck you want them to go!
The only limit is your imagination.

Can the LED strips be cut or trimmed?
Yes! You can easily cut the LED strips. Use a sharp utility knife. The LEDs are wired in groups of 3, so you should cut every 3 LEDs.
Note: Some of the shorter lengths can't be cut because of a critical power wire inside. Before you cut, just make sure you won't be cutting a power wire, otherwise your LED strip could be damaged.

Can the cut section of the strip be re-used?
While it is physically possible, it is not a simple procedure and not worth the effort. For practical purposes, you are better off discarding the cut portion.

Once cut, is the strip still waterproof?
If you cut it right, it will maintain a degree of "weather resistance". But to make a cut strip fully waterproof again, we recommend you add some silicone sealant to the cut end.

What is the best way to mount them?
Cable ties, also known as zip ties work for many installations. 

How should they be mounted in the wheel well?
Before removing the wheel, you should hold the strip in a few locations behind the wheel until you find a suitable location. Play around with some different options. We find it works best if they are mounted on or behind suspension components.

Do the LED strips require resistors?
No. The LED strips do not require any resistors. They are ready to work on any 12 volt power source.

Which wire is power and which is ground?
The silver wire is 12v +, and the gold wire is 12v - (ground). If you accidentally reverse them, nothing bad will happen.

SMD 335 Flexible LED Strip light, 300Leds/reel, 3-LED Cuttable, DC12V, 24W/reel, 2A/reel, 120°, 5m/reel, width : 5mm, On PCB with self-adhesive back .

Non-waterproof & waterproof available,  color temperature:

Pure White: 6000-7000K, Warm White: 3000-3500K, contact us for special color temperature requirment.

1:Non-waterproof Flexible LED Strip: PCB (Printed Circuit Board) material with self-adhesive back.
2:Waterproof Flexible LED Strip--Surface Injection: Except it PCB material is encapsulated with plastic Gel at surface, with self-adhesive back, Water resistant coat (IP65).

Side View Flexible LED light's low profile allows use in many discreet locations. The depth of the Side View strip is a mere 0.2 inches, so it will fit virtually anywhere, with a 3M adhesive backing that permits easy mounting. The flat-style 12V LEDs cast light sideways at a 120 degree angle from the strip surface. The Flexible LED Light is designed to cast no shadows and boasts a desirable seamless glow. Low energy consumption not only means saving money, it also can translate to an elimination of electrical shock and fire danger.

The flexible design and high-intensity LED lighting make it ideal for:

• floorboard and stairway lighting

• cove, closets and interior lighting

• exhibit lighting

• kitchen cabinet lighting

• project lighting

• close lighting task application

waterproof Flexible LED strip,12 pcs Tri-Chip SMD 5050 LEDs,DC 12V,2.88W/pcs,0.24A/pcs. If you choose RGB,please click here for controller for Tri-chip LED strip. "+","L","T" model connector available.

Like our other Tri-Chip LED Strip, they are by far our brightest, most durable, and most efficient LED ribbon strip, for use in any location.  for a fully waterproof and weatherproof strip, ready to take any weather conditions you're able to throw it at.

With ribbon so flexible, it can make achieve 90 degree angle bends, even do a barrel roll, these ribbons can be shaped and bent to your hearts desire for use in a vast array of interior or exterior lighting applications.This product also makes it quite easily to replace that dim, out-dated, and just plain depressing lighting we all know we have somewhere around the house, business, or bar.

The slim line Tri-Chip Ultra Bright LED modules used in these LED strips are not only our brightest used yet, but one of our most efficient models by far!

With a Warm White color you can easily replace any traditional lighting around the house, camper, office, under cabinets, RV, even on the interior of your boat. Use the Daylight White color for Retail Lighting, Commerical Lighting, Trade Show Lighting, or anywhere you want a perfectly crisp white cast of light.

1 Foot LED Strip : With 12 evenly spaced super-sized Tri-Chip LEDs per foot, you can be sure to get that even light spread we all desire, even when mounted close to another surface. These over-sized LED modules throw a wide spread angle of light, which always is pleasing for ambient lighting purposes.

Installation:
1) Units are 100% plug and play, no electronic skills or soldering required.
2) Connect the red and black wires to any 12V Power Source.
3) 3M VHB is included for a iron-clad bond that won't fail on you, or you can use 3M in a conjunction with silicone sealant for a truly seamless install, anywhere you desire.

To make life (and installation) even easier, we've included 1 foot of lead-in power wire clearly colored, so installation is only a hop, skip, and a jump away!