waterproof Flexible LED strip,12 pcs Tri-Chip SMD 5050 LEDs,DC 12V,2.88W/pcs,0.24A/pcs. If you choose RGB,please click here for controller for Tri-chip LED strip. "+","L","T" model connector available.

Like our other Tri-Chip LED Strip, they are by far our brightest, most durable, and most efficient LED ribbon strip, for use in any location.  for a fully waterproof and weatherproof strip, ready to take any weather conditions you're able to throw it at.

With ribbon so flexible, it can make achieve 90 degree angle bends, even do a barrel roll, these ribbons can be shaped and bent to your hearts desire for use in a vast array of interior or exterior lighting applications.This product also makes it quite easily to replace that dim, out-dated, and just plain depressing lighting we all know we have somewhere around the house, business, or bar.

The slim line Tri-Chip Ultra Bright LED modules used in these LED strips are not only our brightest used yet, but one of our most efficient models by far!

With a Warm White color you can easily replace any traditional lighting around the house, camper, office, under cabinets, RV, even on the interior of your boat. Use the Daylight White color for Retail Lighting, Commerical Lighting, Trade Show Lighting, or anywhere you want a perfectly crisp white cast of light.

1 Foot LED Strip : With 12 evenly spaced super-sized Tri-Chip LEDs per foot, you can be sure to get that even light spread we all desire, even when mounted close to another surface. These over-sized LED modules throw a wide spread angle of light, which always is pleasing for ambient lighting purposes.

Installation:
1) Units are 100% plug and play, no electronic skills or soldering required.
2) Connect the red and black wires to any 12V Power Source.
3) 3M VHB is included for a iron-clad bond that won't fail on you, or you can use 3M in a conjunction with silicone sealant for a truly seamless install, anywhere you desire.

To make life (and installation) even easier, we've included 1 foot of lead-in power wire clearly colored, so installation is only a hop, skip, and a jump away!

RF Remote Control dimmer is a controller that can adjust brightness infinitely, its control mode is wireless control,you could adjust light to the appropriate lighting brightness in accordance with your actual need. It is perfect for dimming your Flexible LED Strip. It can be used with any of the many colors available. Easy to install.

Specifications:

● Working temperature: -20-60 ℃
● Supply voltage: DC 12V
● Output: 1 channel
● Dimension: L110 X W56 X H34 mm
● Rated load current: <8A
● Output power:<96W

LED Power Supply, 110-220V AC to Low voltage DC, Plug Adapter to suit your Country, Plug into any household 110/220V AC electrical outlet.

SMD 3528 (300leds)  24W/5 meters,  so you need  at least 2 amp 24W led power supply, we recommend 3 amp 36W led power supply.

SMD 5050 (150leds)  36W/5 meters,  so you need  at least 3 amp 36W led power supply, we recommend 4 amp 48W led power supply.

SMD 5050 (300leds)  72W/5 meters,  so you need  at least 6 amp 72W led power supply, we recommend 8 amp 96W led power supply.

Product Description

Super bright LEDs
Flexible and durable strip 
Brand new and waterproof
Transparent when not in use
Both use external and internal

Voltage: 12 V
Watt: 1.92 W
Current: 0.16 amps
Wire Length: 38 cm
Strip Length: 24 cm
Number of Bulbs: 24 pcs
Easy to install and clean
Bulbs Color:Yellow,Red,White,Green,Blue

Very bright and very cool, these strips, give you total lighting flexibility, put next to no drain on your car battery, and no matter whether you use them in hard rain or the driest night on record, they won't fail you.

LEDSTRISPWORLD LED strips put out a minimum amount of heat, so there's no fire risk, and they'll fit in a variety of places:
Around the front grille
Under foot-wells
On wheel wells
In the trunk
Under the hood
On headlights
Along the dash
Wherever the heck you want them to go!
The only limit is your imagination.

Can the LED strips be cut or trimmed?
Yes! You can easily cut the LED strips. Use a sharp utility knife. The LEDs are wired in groups of 3, so you should cut every 3 LEDs.
Note: Some of the shorter lengths can't be cut because of a critical power wire inside. Before you cut, just make sure you won't be cutting a power wire, otherwise your LED strip could be damaged.

Can the cut section of the strip be re-used?
While it is physically possible, it is not a simple procedure and not worth the effort. For practical purposes, you are better off discarding the cut portion.

Once cut, is the strip still waterproof?
If you cut it right, it will maintain a degree of "weather resistance". But to make a cut strip fully waterproof again, we recommend you add some silicone sealant to the cut end.

What is the best way to mount them?
Cable ties, also known as zip ties work for many installations. 

How should they be mounted in the wheel well?
Before removing the wheel, you should hold the strip in a few locations behind the wheel until you find a suitable location. Play around with some different options. We find it works best if they are mounted on or behind suspension components.

Do the LED strips require resistors?
No. The LED strips do not require any resistors. They are ready to work on any 12 volt power source.

Which wire is power and which is ground?
The silver wire is 12v +, and the gold wire is 12v - (ground). If you accidentally reverse them, nothing bad will happen.

Summarization
8 Keys RGB RF Controller adopts the advanced micro-control unit,it is used for controlling a variety of lamp whose
source of light is LED. For instance, point source of light,flexible strip light, wall washer lamp, glass curtain wall
light and so on;It has power-fail memory, synchronized indicator light show and other functions. At the same
time,it has many advantages such as low price, easy connection and simplicity to use. According to the actual
need of customers,it can carry out jumpy changing,gradual changing,stroboflash and other effects of change.
Technical Parameters
? Working temperature: -20-60 ?
? Supply voltage: DC12V
? Output: 3 channels
? Connecting mode: common anode
? External dimension: L121?W53?H25 mm
? Packing size: L150?W76?H51 mm
? Net weight:255g
? Gross weight:285g
? Static power consumption: <1W
? Output current: <4A(each channel)
? Output power: 12V:<144W

Direction for use
1. Connect the load wire at first, following by the power wire; Please ensure short circuit can not
occur between connecting wire before you turn on the power;
2. Adopt film button and RF for controlling,there are 8 buttons in all, the funtion of each key as
follows:
(1): you could turn on/off controller at any time;
(2): Play/pause button,it is convenient for you to see the static effection of led;
S(3)+: The step of the speed change add 1 by each pressing;
S-(4): The step of the speed change subtract 1 by each pressing;
B+(5): A brightness control button,the step of the brightness add 1 by each pressing;
B-(6): The step of the brightness subtract 1 by each pressing;
M+(7): The NO. of patterns add 1 by each pressing;(refer to the following form)
M-(8): The NO. of patterns subtract 1 by each pressing;

With this 12V Inline LED Dimmer Switch you can now dim most of LEDSTRIPWORLD's 12V DC LED lighting products! Simply plug this attractive and easy-to-use LED dimmer switch into your 12V adapter at one end and your lighting source at the other, whether it's strip lighting or cabinet lighting. Dimming is achieved with a turn of the smooth and sensitive rotary dial, which is housed in sturdy white plastic. It can also be used as an on/off switch, but with all the added features of a dimmer.

This switch features full on and off capabilities, along with everything in between. The male and female connectors at each end of the switch are the 1/4" coaxial plug that is standard on most LEDSTRIPWORLD's products, making it a flexible and useful accessory.

With the 12V LED Dimmer Switch, you can take advantage of both the brightness of LEDSTRIPWORLD's strip lights and bars as well as their low-level mood and accent lighting capacities, all without any troublesome flickering. Use this switch for sensitive lighting situations, such as glass or crystal displays, fine art lighting, or in any application where just the right amount of brightness is required.

Summarization
Dimmer is a controller that it can adjust brightness, its control mode is knob-operated control, you could adjust light to the appropriate lighting brightness in accordance with your actual need.
Technical parameters
?Working temperature: -20-60?
?Supply voltage: 12V DC (DC5V, DC24V also available, if you need, please specify the required voltage in "Special Instructions" when checkout)
?Output: 1 channel
?External dimension: L61?W33?H32 mm
?Packing size: L105?W65?H40 mm
?Static power consumption: <1W
?Output current: <2A
?Power output: 24W

Direction for use
1. Connect the load wire at first, following by the power wire;
2. Adopt rotary button,its function as follows:
Rotate button to the right,brightness will be brighter,when you rotate it to the far right,the
brightness is greatest. Rotate button to the left,brightness will be darker,when you rotate it to the far left,the light will be turned off.

Typical Applications